Six Flaws. No Login. No Patch.
Six flaws. No login required. No patch available. That is the state of the Danfoss AK-SM800A, the controller that runs the fridges and freezers in supermarkets and food stores across Europe — and Dutch security consultancy Midnight Blue says a remote attacker can take one over without ever signing in.
The researchers found all six in under an hour of manual review, working from firmware Danfoss itself offers for download. They examined version 5.3.2. Every version up to and including it is affected. No CVE IDs yet; the technical details stay private during coordinated disclosure with Danfoss.
Five flaws skip the login. The sixth breaks the lock.
Five of the six flaws sit in web request handlers that do not require a login, inside a program that runs as root. Through one of them, the researchers ran code as root on older firmware, version 3.3.0 — and found the same bugs present in 5.3.2. The attacker needs no password, no stolen session, no phishing victim. Reach the controller from the internet and the door is already open.
Danfoss ships a protection called Strict mode, which closes almost all of the controller’s web attack surface to anyone who has not logged in, and it blocked the flaw the researchers used for their demonstration. But the sixth flaw is in the gateway that enforces Strict mode itself — the program that blocks every request except the login until a user has signed in. When the researchers ran firmware 5.3.2 in an emulator with Strict mode on, that flaw crashed the gateway. The crash could become code execution with more work, they say; the gateway lacks basic defenses such as stack canaries.
With code running as root, an attacker could change the controller’s settings, start unwanted defrost cycles, and hide that activity from its logs. The controllers do not use secure boot, the researchers found, so an attacker could plant code that survives a factory reset and a firmware update — or make a controller unusable until it is replaced.

The patch that isn’t
There is no fix, and the newest firmware does not help. Danfoss lists package 5.4.0, dated November, as its newest AK-SM800A release. Its readme and update guide cover upgrade steps and a stricter password rule — neither mentions a fix. The researchers put it plainly: “It’s not really possible either because according to the file timestamp this firmware was likely built on October 29, before the second wave of cyber attacks and well before our vulnerability reports.”
Germany’s BSI first said 5.4.0 was not affected, then corrected itself the same day. The vendor’s advisory page lists no advisory for the six flaws, and no fix date. The researchers say the code almost certainly holds more flaws like these.
The France connection — and what it is not
The AK-SM800A name will sound familiar. Such controllers were targeted in the refrigeration attacks in France that began on October 11, and in a second wave across Europe that began last week, causing unwanted defrost cycles and destroyed stock — and France has since named the attackers behind the October wave.
But the agencies and the researchers are explicit on one point: nobody links the six new flaws to those incidents. The BSI says it has no information about any exploitation of the six new flaws. Treating this disclosure as the explanation for the France attacks would be wrong — and dangerous. The flaws are unpatched, unexploited as far as anyone knows, and now public knowledge.
What operators should do now
Cybersecurity agencies in Belgium, Ireland, and Germany told operators this week to take the controllers’ management interfaces off the internet. That advice must not wait for a patch, and it applies even where firmware is current and Strict mode is on. Updating the firmware, changing default passwords, or turning on Strict mode is not enough on its own.

Four checks, in order:
1. Find every exposed controller. Inventory every AK-SM800A whose management interface can be reached from the internet — including 4G/5G modems — and remove that exposure.
2. Give remote access only through a secure VPN or a protected internal network. A firewall allowlist for the service company’s IPs is a short-term measure, not a fix.
3. Check for changes you did not make. Review temperature setpoints, defrost schedules, alarm settings, user accounts, and remote-access settings.
4. Keep monitoring alive. Before cutting off the data a controller sends to its refrigeration service company, check contract and insurance terms — and set up protected remote access so monitoring can continue.
Ireland’s NCSC also advises the latest supported firmware, changed default passwords, and Strict mode — but says operators should not rely on those steps alone. Danfoss’s own update guide agrees: the AK-SM800A should not be directly reachable from the public internet, Strict Mode or not.
The flaws were found in under an hour, and the firmware that was supposed to be the answer was built before the flaws were even reported. Until Danfoss ships a fix, taking the controller off the internet is not a precaution. It is the fix.



















